how to build boost binary libraries for GCC in windows 10

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

how to build boost binary libraries for GCC in windows 10

Boost - Users mailing list

Hi All

 

As VS supports OpenMP2.0 only, I have to use GCC instead for my project with parallelisation in coding. I have downloaded Cygwin and installed the GCC 6.4.0 then updated it to the latest version 5.5.0 on my windows 10. All those binary libraries I built up in VS 2017, I guess, cannot be usable for GCC, so it may be necessary to rebuild them for boost 1.65.1 for GCC. Could you guys show me how to build them?

 

Cheers

Renfan   


_______________________________________________
Boost-users mailing list
[hidden email]
https://lists.boost.org/mailman/listinfo.cgi/boost-users
Reply | Threaded
Open this post in threaded view
|

Re: how to build boost binary libraries for GCC in windows 10

Boost - Users mailing list
On Wed, 22 Nov 2017, at 10:09, Renfan Luo via Boost-users wrote:
> Hi All
>  
> As VS supports OpenMP2.0 only, I have to use GCC instead for my project with parallelisation in coding. I have downloaded Cygwin and installed the GCC 6.4.0 then updated it to the latest version 5.5.0 on my windows 10. All those binary
 libraries I built up in VS 2017, I guess, cannot be usable for GCC, so it may be necessary to rebuild them for boost 1.65.1 for GCC. Could you guys show me how to build them?
>  
> Cheers
> Renfan   

Hi,

check out MSYS2: http://www.msys2.org/
It comes with GCC 7.2 (including OpenMP support) and prebuilt packages of Boost 1.64.0.

-
Jan
_______________________________________________
Boost-users mailing list
[hidden email]
https://lists.boost.org/mailman/listinfo.cgi/boost-users
Reply | Threaded
Open this post in threaded view
|

Re: how to build boost binary libraries for GCC in windows 10

Boost - Users mailing list
Hi Jan

Thank you very much. This helps. Like I said in another email, I had problem with MPI installation. Do you have any idea of how to fix it.

Best regards
Renfan

-----Original Message-----
From: Boost-users [mailto:[hidden email]] On Behalf Of Jan Niklas Hasse via Boost-users
Sent: 22 November 2017 09:43
To: [hidden email]
Cc: Jan Niklas Hasse <[hidden email]>
Subject: Re: [Boost-users] how to build boost binary libraries for GCC in windows 10

On Wed, 22 Nov 2017, at 10:09, Renfan Luo via Boost-users wrote:
> Hi All
>  
> As VS supports OpenMP2.0 only, I have to use GCC instead for my project with parallelisation in coding. I have downloaded Cygwin and installed the GCC 6.4.0 then updated it to the latest version 5.5.0 on my windows 10. All those binary
 libraries I built up in VS 2017, I guess, cannot be usable for GCC, so it may be necessary to rebuild them for boost 1.65.1 for GCC. Could you guys show me how to build them?
>  
> Cheers
> Renfan   

Hi,

check out MSYS2: http://www.msys2.org/
It comes with GCC 7.2 (including OpenMP support) and prebuilt packages of Boost 1.64.0.

-
Jan
_______________________________________________
Boost-users mailing list
[hidden email]
https://lists.boost.org/mailman/listinfo.cgi/boost-users
_______________________________________________
Boost-users mailing list
[hidden email]
https://lists.boost.org/mailman/listinfo.cgi/boost-users
Reply | Threaded
Open this post in threaded view
|

Re: how to build boost binary libraries for GCC in windows 10

Boost - Users mailing list
Hi,

I've never used MPI, but this looks like it should work: https://stackoverflow.com/a/12983787/647898

On Thu, 23 Nov 2017, at 11:30, Renfan Luo via Boost-users wrote:

> Hi Jan
>
> Thank you very much. This helps. Like I said in another email, I had problem with MPI installation. Do you have any idea of how to fix it.
>
> Best regards
> Renfan
>
> -----Original Message-----
> From: Boost-users [mailto:[hidden email]] On Behalf Of Jan Niklas Hasse via Boost-users
> Sent: 22 November 2017 09:43
> To: [hidden email]
> Cc: Jan Niklas Hasse <[hidden email]>
> Subject: Re: [Boost-users] how to build boost binary libraries for GCC in windows 10
>
> On Wed, 22 Nov 2017, at 10:09, Renfan Luo via Boost-users wrote:
> > Hi All
> >  
> > As VS supports OpenMP2.0 only, I have to use GCC instead for my project with parallelisation in coding. I have downloaded Cygwin and installed the GCC 6.4.0 then updated it to the latest version 5.5.0 on my windows 10. All those binary
>  libraries I built up in VS 2017, I guess, cannot be usable for GCC, so it may be necessary to rebuild them for boost 1.65.1 for GCC. Could you guys show me how to build them?
> >  
> > Cheers
> > Renfan   
>
> Hi,
>
> check out MSYS2: http://www.msys2.org/
> It comes with GCC 7.2 (including OpenMP support) and prebuilt packages of Boost 1.64.0.
>
> -
> Jan
> _______________________________________________
> Boost-users mailing list
> [hidden email]
> https://lists.boost.org/mailman/listinfo.cgi/boost-users
> _______________________________________________
> Boost-users mailing list
> [hidden email]
> https://lists.boost.org/mailman/listinfo.cgi/boost-users
_______________________________________________
Boost-users mailing list
[hidden email]
https://lists.boost.org/mailman/listinfo.cgi/boost-users
Reply | Threaded
Open this post in threaded view
|

Re: how to build boost binary libraries for GCC in windows 10

Boost - Users mailing list
Hi Jan

Thanks, this helps a lot!

Renfan


-----Original Message-----
From: Boost-users [mailto:[hidden email]] On Behalf Of Jan Niklas Hasse via Boost-users
Sent: 23 November 2017 10:33
To: [hidden email]
Cc: Jan Niklas Hasse <[hidden email]>
Subject: Re: [Boost-users] how to build boost binary libraries for GCC in windows 10

Hi,

I've never used MPI, but this looks like it should work: https://stackoverflow.com/a/12983787/647898

On Thu, 23 Nov 2017, at 11:30, Renfan Luo via Boost-users wrote:

> Hi Jan
>
> Thank you very much. This helps. Like I said in another email, I had problem with MPI installation. Do you have any idea of how to fix it.
>
> Best regards
> Renfan
>
> -----Original Message-----
> From: Boost-users [mailto:[hidden email]] On
> Behalf Of Jan Niklas Hasse via Boost-users
> Sent: 22 November 2017 09:43
> To: [hidden email]
> Cc: Jan Niklas Hasse <[hidden email]>
> Subject: Re: [Boost-users] how to build boost binary libraries for GCC
> in windows 10
>
> On Wed, 22 Nov 2017, at 10:09, Renfan Luo via Boost-users wrote:
> > Hi All
> >  
> > As VS supports OpenMP2.0 only, I have to use GCC instead for my
> > project with parallelisation in coding. I have downloaded Cygwin and
> > installed the GCC 6.4.0 then updated it to the latest version 5.5.0
> > on my windows 10. All those binary
>  libraries I built up in VS 2017, I guess, cannot be usable for GCC, so it may be necessary to rebuild them for boost 1.65.1 for GCC. Could you guys show me how to build them?
> >  
> > Cheers
> > Renfan
>
> Hi,
>
> check out MSYS2: http://www.msys2.org/ It comes with GCC 7.2
> (including OpenMP support) and prebuilt packages of Boost 1.64.0.
>
> -
> Jan
> _______________________________________________
> Boost-users mailing list
> [hidden email]
> https://lists.boost.org/mailman/listinfo.cgi/boost-users
> _______________________________________________
> Boost-users mailing list
> [hidden email]
> https://lists.boost.org/mailman/listinfo.cgi/boost-users
_______________________________________________
Boost-users mailing list
[hidden email]
https://lists.boost.org/mailman/listinfo.cgi/boost-users
_______________________________________________
Boost-users mailing list
[hidden email]
https://lists.boost.org/mailman/listinfo.cgi/boost-users