CMake Announcement from Boost Steering Committee

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
202 messages Options
CMake Announcement from Boost Steering Committee – The libraries produced by the Boost community have had a greater impact on the way that the C++ community writes code than any other library imple...
Am 18.07.2017 um 15:12 schrieb Jon Kalb via Boost: > The libraries produced by the Boost community have had a greater impact on the way that th...
On 7/19/2017 11:08 AM, Klemens Morgenstern via Boost wrote: > Am 18.07.2017 um 15:12 schrieb Jon Kalb via Boost: >> The libraries produce...
For whatever its worth as a user for 12 years, and someone who would like to contribute more then a rare bugfix, I'm glad the SC stepped in. I've...
Since you are making a variety of accusations.. On Wed, Jul 26, 2017 at 11:01 PM, Gary Furnish via Boost < boost@...> wrote: > I'v...
On Thu, Jul 27, 2017 at 8:40 AM, Rene Rivera via Boost <boost@...> wrote: > Since you are making a variety of accusations.. > >...
AMDG On 07/27/2017 09:28 AM, Gary Furnish via Boost wrote: > . > Sure. See the discussions where if you aren't doing things the > ...
I was referring to the need to --ignore-site-config --user-config=build_directory/user_config.jam --build-dir=build_directory --stage-dir=build_...
On 7/27/2017 11:28 AM, Gary Furnish via Boost wrote: > On Thu, Jul 27, 2017 at 8:40 AM, Rene Rivera via Boost > <boost@...> wrote: ...
On Thu, Jul 27, 2017 at 10:30 AM, Edward Diener via Boost <boost@...> wrote: > On 7/27/2017 11:28 AM, Gary Furnish via Boost wrote: &g...
AMDG On 07/27/2017 12:42 PM, Gary Furnish via Boost wrote: > > I have seen the whitespace issue dismissed as intended behavior > b...
On 7/27/2017 2:42 PM, Gary Furnish via Boost wrote: > On Thu, Jul 27, 2017 at 10:30 AM, Edward Diener via Boost > <boost@...> wrote:...
> -----Original Message----- > From: Boost [mailto:boost-bounces@...] On Behalf Of Gary Furnish via Boost > Sent: 27 July 2017 16:28 &...
On Thu, Jul 27, 2017 at 8:28 AM, Gary Furnish via Boost <boost@...> wrote: > How many of the latest proposals for C++ have actually bee...
On Thu, Jul 27, 2017 at 6:01 AM, Gary Furnish via Boost <boost@...> wrote: > For whatever its worth as a user for 12 years, and someone...
Right my point was that 1) Users haven't had a voice in the discussion for far too long 2) What needed to be improved has been known largely for...
On 19/07/2017 18:08, Klemens Morgenstern via Boost wrote: > Am 18.07.2017 um 15:12 schrieb Jon Kalb via Boost: >> The libraries produced ...
I'd like to weigh in as a consumer and occasional patcher of the Boost library. My company uses boost extensively for our cross-platform Windows a...
On 7/21/17 12:04 PM, JeremyAgost via Boost wrote: > I'd like to offer whatever help I can muster with regard to adopting CMake > in Boos...
I looked at your Cmake file for a library I maintain - the boost.build links only against boost.thread if std::thread is not available (feature ...
On 19/07/2017 21:01, Oliver Kowalke via Boost wrote: > I looked at your Cmake file for a library I maintain - the boost.build > links only...
As mentioned before - it is not only your cmake port, all presented boost-cmake files have ported only fraction of the required functionality. F...
On 19/07/2017 22:46, Oliver Kowalke via Boost wrote: > As mentioned before - it is not only your cmake port, all presented > boost-cma...
On 7/19/2017 4:46 PM, Oliver Kowalke via Boost wrote: > As mentioned before - it is not only your cmake port, all presented > boost-cmake ...
On 19/07/2017 23:14, Edward Diener via Boost wrote: > On 7/19/2017 4:46 PM, Oliver Kowalke via Boost wrote: >> As mentioned before - it...
On Wed, 2017-07-19 at 17:14 -0400, Edward Diener via Boost wrote: > On 7/19/2017 4:46 PM, Oliver Kowalke via Boost wrote: > > > > ...
On 19/07/2017 18:08, Klemens Morgenstern via Boost wrote: > Fourthly I don't think the comittee does understand how much work this > will...
Am 19.07.2017 um 18:38 schrieb Ion Gaztañaga via Boost: > On 19/07/2017 18:08, Klemens Morgenstern via Boost wrote: >> Fourthly I don't t...
Thanks for announcing this, Jon, and thanks to the Steering Committee for making a decision. From where I am sitting, CMake is the clear winne...
+1000. I think you summed up my feelings as well. Having the SC step in now was a good move. At some point, arguments like "tabs vs spaces&q...
> -----Original Message----- > From: Boost [mailto:boost-bounces@...] On Behalf Of Jared Grubb via Boost > Sent: 20 July 2017 22:35 &g...
On 2017-07-21 09:30, Paul A. Bristow via Boost wrote: > The mailing list has recently been focussing on just that - the *how*. > > Th...
Roger Leigh wrote: > This is what we do in the absence of proper dependency information being > provided by Boost, i.e. no pkg-config, ...
> Roger Leigh wrote: > > > This is what we do in the absence of proper dependency information being > > provided by Boost, i...
On 22/07/17 11:47, Peter Dimov via Boost wrote: >> Roger Leigh wrote: >> >> > This is what we do in the absence of pro...
> This is a case where Boost's policy of appending all of the > toolset/configuration/threading model etc. to the library name is > som...
Niall Douglas wrote: > As I already mentioned in another post, specifying the entire > configuration in the target name is exactly the ...
cmake target and binary name mangling (was: Re: CMake Announcement from Boost Steering Committee) – >> As I already mentioned in another post, specifying the entire >> configuration in the target name is exactly the right way to impl...
> On Jul 23, 2017, at 5:42 AM, Niall Douglas via Boost <boost@...> wrote: > >>> As I already mentioned in another post, spe...
Re: cmake target and binary name mangling – On 24/07/2017 01:19, P F via Boost wrote: >> On Jul 23, 2017, at 5:42 AM, Niall Douglas via Boost <boost@...> wrote: >> >>...
On Mon, 2017-07-24 at 12:42 +0200, Florent Castelli via Boost wrote: > On 24/07/2017 01:19, P F via Boost wrote: > > > > > >...
paul wrote: > Yea, I dont think we should mangle the logical target name at all. The > user should be able to write `target_link_librar...
>> Yea, I dont think we should mangle the logical target name at all. The >> user should be able to write `target_link_libraries(lib ...
Niall Douglas wrote: > > As we already discussed, sl/dl/hl have the problem that when a > > non-header-only library links to a head...
>> As we also previously discussed, the easy way out of that is to >> enforce all header, all static or all shared. > > But ...
Niall Douglas wrote: > I think you're overcomplicating things. > > If a header only library has a dependency on a non-header only libr...
On 25/07/2017 23:01, Peter Dimov via Boost wrote: > Niall Douglas wrote: >> I think you're overcomplicating things. >> >>...
Niall Douglas wrote: > > The implication is that when a library changes from header-only to > > static/shared, all dependent librar...
On 25/07/2017 23:16, Peter Dimov via Boost wrote: > Niall Douglas wrote: >> > The implication is that when a library changes from he...
On 7/26/2017 4:22 PM, Niall Douglas via Boost wrote: > On 25/07/2017 23:16, Peter Dimov via Boost wrote: >> Niall Douglas wrote: >&...
>> This seems highly unlikely to be desirable in practice. A header only >> library guaranteeing header only usage suddenly requiring...
On 7/26/2017 6:29 PM, Niall Douglas via Boost wrote: >>> This seems highly unlikely to be desirable in practice. A header only >>...
On Wed, 2017-07-26 at 23:29 +0100, Niall Douglas via Boost wrote: > > > > > > > > This seems highly unlikely to be desir...
> The point in "modern cmake 3" if you will, is that I write: > > find_package(boost_foo) > target_link_libraries(myLib ...
On Thursday, July 27, 2017 2:06:49 AM CDT Niall Douglas via Boost wrote: > Where are you getting the notion that end users want to not care ...
On Wed, Jul 26, 2017 at 12:16 AM, Peter Dimov via Boost <boost@...> wrote: > Niall Douglas wrote: >> >> > The implicat...
> Yea, I dont think we should mangle the logical target name at all. The user > should be able to write `target_link_libraries(lib boost::f...
On 24/07/17 21:07, Niall Douglas via Boost wrote: >> Yea, I dont think we should mangle the logical target name at all. The user >> ...
On 24/07/2017 21:27, Roger Leigh via Boost wrote: > On 24/07/17 21:07, Niall Douglas via Boost wrote: >>> Yea, I dont think we shoul...
>>> The target graphs are REGEXable via the pattern >>> "<lib>_<hl|sl|dl>-<special>-<binary>" ...
On 24/07/2017 14:27, Niall Douglas via Boost wrote: >>>> The target graphs are REGEXable via the pattern >>>> "<li...
> >> ned@lyta:~/windocs/boostish/afio/build_posix$ make help | sort > >> ... afio-asan > >> ... afio_dl > >>...
Re: cmake target and binary name mangling – On 23/07/17 11:42, Niall Douglas via Boost wrote: >>> As I already mentioned in another post, specifying the entire >>> config...
> I would suggest that the CMake build for Boost should do things > following the standard practices for CMake, and be as simple as possibl...
On 24/07/2017 10:23, Niall Douglas wrote: > So everything you just said is all irrelevant. Meanwhile, there are > *enormous* end user gain...
> On Jul 23, 2017, at 5:23 PM, Niall Douglas via Boost <boost@...> wrote: > >> I would suggest that the CMake build for Boo...
>> So everything you just said is all irrelevant. Meanwhile, there >> are *enormous* end user gains to mangling the binary name. >...
On Mon, Jul 24, 2017 at 2:12 PM, Niall Douglas via Boost <boost@...> wrote: >>> So everything you just said is all irrelevant. Me...
On 24/07/2017 13:20, Olaf van der Spek wrote: > On Mon, Jul 24, 2017 at 2:12 PM, Niall Douglas via Boost > <boost@...> wrote: >&...
On Mon, Jul 24, 2017 at 2:28 PM, Niall Douglas via Boost <boost@...> wrote: > On 24/07/2017 13:20, Olaf van der Spek wrote: >> O...
Am 24.07.2017 um 14:28 schrieb Niall Douglas via Boost: > On 24/07/2017 13:20, Olaf van der Spek wrote: >> On Mon, Jul 24, 2017 at 2:12...
Niall Douglas wrote: > But for developers needing to test just compiled binaries in various > combinations and configurations, name man...
> -----Original Message----- > From: Boost [mailto:boost-bounces@...] On Behalf Of P F via Boost > Sent: 24 July 2017 00:40 > To: b...
Niall Douglas wrote: > >> As I already mentioned in another post, specifying the entire > >> configuration in the target name...
Re: cmake target and binary name mangling – >> So, all in all, very like Boost.Build currently does. And that's >> because it's the correct design and approach to take. So we sh...
> This is a case where Boost's policy of appending all of the > toolset/configuration/threading model etc. to the library name is >...
> On Jul 22, 2017, at 7:25 AM, John Maddock via Boost <boost@...> wrote: > > >> This is a case where Boost's policy of...
On 7/22/2017 8:10 PM, P F via Boost wrote: > >> On Jul 22, 2017, at 7:25 AM, John Maddock via Boost <boost@...> wrote: >>...
On Sat, Jul 22, 2017 at 1:18 PM, Roger Leigh via Boost <boost@...> wrote: > On 22/07/17 11:47, Peter Dimov via Boost wrote: > This ...
Roger Leigh wrote: > > Similarly, the pkg-config one. I'm genuinely interested in how > > pkg-config support, if we have it, is s...
On 22/07/17 20:00, Peter Dimov via Boost wrote: > Roger Leigh wrote: > >> > Similarly, the pkg-config one. I'm genuinely intere...
Roger Leigh wrote: > The boost_system dependency, for example, is required when linking to > filesystem dynamically on Linux and BSD be...
On 07/23/17 01:09, Peter Dimov via Boost wrote: > Roger Leigh wrote: > >> The boost_system dependency, for example, is required when ...
Andrey Semashev wrote: > It did succeed for me, but it took about 4.5GB and about 10 seconds to > complete. :) Works then. :-) pkg-c...
On 07/23/17 03:14, Peter Dimov via Boost wrote: > > On a related note, an interesting property of these .pc files is that, > as curr...
Andrey Semashev wrote: > PS: As a totally wild idea, would it be possible to generate .pc files as > an artefact of dynamically generat...
Roger Leigh wrote: > I ended up writing this; it's in a CMake script, so it's a bit verbose: > > https://gitlab.kitware.com/cmake/cm...
On 07/22/17 13:47, Peter Dimov via Boost wrote: > > Similarly, the pkg-config one. I'm genuinely interested in how > pkg-config supp...
Andrey Semashev wrote: > When Boost is packaged though, it is typically compiled in just one > configuration, so a single set of binari...
On 07/22/17 15:06, Peter Dimov via Boost wrote: > Andrey Semashev wrote: > >> When Boost is packaged though, it is typically compi...
On Fri, Jul 21, 2017 at 4:25 PM, Roger Leigh via Boost <boost@...> wrote: > Could I also point to this block in > https://gitlab.ki...
On 07/24/17 15:29, Olaf van der Spek via Boost wrote: > On Fri, Jul 21, 2017 at 4:25 PM, Roger Leigh via Boost > <boost@...> wrote: ...
On Mon, Jul 24, 2017 at 2:36 PM, Andrey Semashev via Boost <boost@...> wrote: > On 07/24/17 15:29, Olaf van der Spek via Boost wrote: ...
On 21/07/2017 16:25, Roger Leigh via Boost wrote: > Could I also point to this block in > https://gitlab.kitware.com/cmake/cmake/blob/mas...
On Fri, Jul 21, 2017 at 9:25 AM, Roger Leigh via Boost < boost@...> wrote: > On 2017-07-21 09:30, Paul A. Bristow via Boost wrote: &...
Roger Leigh wrote: > Could I point to this trac ticket: > https://svn.boost.org/trac10/ticket/1094 (this is about pkg-config support ...
On Fri, Jul 21, 2017 at 7:25 AM, Roger Leigh via Boost <boost@...> wrote: > Could I also point to this block in > https://gitlab.ki...
On 7/20/2017 2:35 PM, Jared Grubb via Boost wrote: 2c: > Having the SC step in now was a good move. At some point, arguments like "tabs ...
> The SC can go ahead and implement everything themselves while all the > people that did all the real work leave. What a colossal example...
Niall Douglas wrote: > Well, that's just ignorant and self serving elitism. Remarkable how much this ignorant and self-serving elitism co...
On 18 July 2017 at 16:59, Rene Rivera via Boost <boost@...> wrote: > On Tue, Jul 18, 2017 at 8:15 AM, Rene Rivera <grafikrobot@...>...
Den 21-07-2017 kl. 18:23 skrev Daniel James via Boost: > On 18 July 2017 at 16:59, Rene Rivera via Boost <boost@...> wrote: >> On...
> -----Original Message----- > From: Boost [mailto:boost-bounces@...] On Behalf Of Thorsten Ottosen via Boost > Sent: 24 July 2017 ...
On 21/07/2017 16:55, Peter Dimov via Boost wrote: > Niall Douglas wrote: > >> Well, that's just ignorant and self serving elitism....
On 21 July 2017 at 21:50, Niall Douglas via Boost <boost@...> wrote: > > Now, none of the above will be popular things to say on boo...
On 7/21/17 1:50 PM, Niall Douglas via Boost wrote: > On 21/07/2017 16:55, Peter Dimov via Boost wrote: >> Niall Douglas wrote: >>...
Am 21.07.2017 um 22:50 schrieb Niall Douglas via Boost: > On 21/07/2017 16:55, Peter Dimov via Boost wrote: >> Niall Douglas wrote: &g...
Niall Douglas wrote: > >> Well, that's just ignorant and self serving elitism. > > > Remarkable how much this ignorant and se...
Den 21-07-2017 kl. 13:41 skrev Niall Douglas via Boost: >> The SC can go ahead and implement everything themselves while all the >> ...
> The problem might be that if you don't involve the developers, > they get very offended, and for good reasons. As no less than two mem...
On Fri, Jul 21, 2017 at 10:30 PM, Niall Douglas via Boost <boost@...> wrote: > Formal written proposals land before the SC to vote on a...
> -----Original Message----- > From: Boost [mailto:boost-bounces@...] On Behalf Of Niall Douglas via Boost > Sent: 21 July 2017 12:41 ...
On 07/21/2017 01:41 PM, Niall Douglas via Boost wrote: <snip> > > Bjarne has often said publicly that Boost's biggest design fla...
> Actually, there are exactly two items in your source: > "- It is too hard to download and use just one Boost library; the > libr...
On 07/21/2017 02:12 PM, Niall Douglas via Boost wrote: >> Actually, there are exactly two items in your source: >> "- It is too...
On Fri, Jul 21, 2017 at 4:41 AM, Niall Douglas via Boost <boost@...> wrote: > - Why are top layer APIs riddled with templates instead o...
On 21/07/2017 02:26, Paul Mensonides via Boost wrote: > On 7/20/2017 2:35 PM, Jared Grubb via Boost wrote: > > >>> From whe...
Klemens Morgenstern writes: >Am 21.07.2017 um 22:50 schrieb Niall Douglas via Boost: > >> Some would say that what has been achieve...
I would like to thank the Steering Committee for making this decision. I realize it has been a contentious one. On Tue, Jul 18, 2017 at 6:12 ...
On 7/18/2017 9:12 AM, Jon Kalb via Boost wrote: > The libraries produced by the Boost community have had a greater impact on the way that the C...
Den 18-07-2017 kl. 16:44 skrev Edward Diener via Boost: > On 7/18/2017 9:12 AM, Jon Kalb via Boost wrote: >> Therefore, we, the Steering...
Den 18-07-2017 kl. 17:14 skrev Thorsten Ottosen via Boost: > Den 18-07-2017 kl. 16:44 skrev Edward Diener via Boost: >> On 7/18/2017 9:12...
There was a lot of discussion on the list recently about various levels of integrations between Boost and CMake. A lot of interest was genera...
On 18/07/2017 20:08, Louis Dionne via Boost wrote: > (2) Prospective Boost developpers are sometimes driven away from submitting > becau...
On 18/07/2017 23:18, Ion Gaztañaga via Boost wrote: > On 18/07/2017 20:08, Louis Dionne via Boost wrote: > >> (2) Prospective Boost de...
On Tue, Jul 18, 2017 at 5:59 PM Alain Miniussi via Boost < boost@...> wrote: > On 18/07/2017 23:18, Ion Gaztañaga via Boost wrote: > ...
On 19/07/2017 3:48, John McFarlane via Boost wrote: > I'm sure this is how a lot of C++ users out there feel. Yes, anyone who > can lea...
2017-07-19 15:19 GMT+03:00 Ion Gaztañaga via Boost <boost@...>: > On 19/07/2017 3:48, John McFarlane via Boost wrote: > >> I'm s...
Sergei Nikulov wrote: > JFYI, same commands used on every system > 1. generate> cmake .. > 2. build> cmake --build . > 3. ...
Am 19.07.2017 3:12 nachm. schrieb "Peter Dimov via Boost" < boost@...>: Sergei Nikulov wrote: JFYI, same commands used on e...
On 2017-07-19 14:58, Oliver Kowalke via Boost wrote: > What does this mean for boost's regression test? > Especially for the fiber library ...
> The rest can be implemented straightforwardly as cache options so that > you can run cmake with options like > > -Dvalgrind=OFF -...
On Wed, 2017-07-19 at 15:58 +0200, Oliver Kowalke via Boost wrote: > Am 19.07.2017 3:12 nachm. schrieb "Peter Dimov via Boost" < ...
On 19/07/2017 14:30, Sergei Nikulov via Boost wrote: > 2017-07-19 15:19 GMT+03:00 Ion Gaztañaga via Boost <boost@...>: >> On 19/07/...
Am 19.07.2017 um 14:30 schrieb Sergei Nikulov via Boost: > 2017-07-19 15:19 GMT+03:00 Ion Gaztañaga via Boost <boost@...>: >> &g...
2017-07-19 15:47 GMT+03:00 Daniela Engert via Boost <boost@...>: > Am 19.07.2017 um 14:30 schrieb Sergei Nikulov via Boost: >> 2017...
On 19/07/2017 14:19, Ion Gaztañaga via Boost wrote: > On 19/07/2017 3:48, John McFarlane via Boost wrote: > >> I'm sure this is how a ...
On 19/07/2017 14:57, Alain Miniussi via Boost wrote: > >> I have no problems to switch to CMake if: >> >> - Cmake does...
On 19/07/2017 16:59, Ion Gaztañaga via Boost wrote: > On 19/07/2017 14:57, Alain Miniussi via Boost wrote: > >> >>> I have ...
On Wed, Jul 19, 2017 at 5:39 PM, Alain Miniussi via Boost <boost@...> wrote: >> MSVC >> >> b2 -j12 >> toolset=m...
On 19/07/2017 18:03, Olaf van der Spek wrote: > On Wed, Jul 19, 2017 at 5:39 PM, Alain Miniussi via Boost > <boost@...> wrote: >...
Le 19.07.17 à 14:19, Ion Gaztañaga via Boost a écrit : > On 19/07/2017 3:48, John McFarlane via Boost wrote: > >> I'm sure this is ...
On 7/18/17 2:18 PM, Ion Gaztañaga via Boost wrote: > On 18/07/2017 20:08, Louis Dionne via Boost wrote: > >> (2) Prospective Boost de...
On Jul 19, 2017 12:00 AM, "Robert Ramey via Boost" <boost@...> wrote: > > On 7/18/17 2:18 PM, Ion Gaztañaga via Boost wrote:...
On 7/18/17 3:52 PM, Tom Westerhout via Boost wrote: > On Jul 19, 2017 12:00 AM, "Robert Ramey via Boost" <boost@...> > wrote...
On 7/18/2017 2:08 PM, Louis Dionne via Boost wrote: > Boost - Dev mailing list wrote >> Den 18-07-2017 kl. 17:14 skrev Thorsten Ottosen v...
> On 7/18/2017 2:08 PM, Louis Dionne via Boost wrote: > > I can't speak for the Steering Committee as a whole, but I believe that > ...
On 7/18/2017 3:27 PM, Louis Dionne via Boost wrote: >> On 7/18/2017 2:08 PM, Louis Dionne via Boost wrote: >>> I can't speak for th...
On Tue, 2017-07-18 at 22:03 -0400, Edward Diener via Boost wrote: > On 7/18/2017 3:27 PM, Louis Dionne via Boost wrote: > > > > &g...
On 7/19/2017 10:29 AM, paul via Boost wrote: > On Tue, 2017-07-18 at 22:03 -0400, Edward Diener via Boost wrote: >> On 7/18/2017 3:27 PM,...
On Wed, 2017-07-19 at 12:39 -0400, Edward Diener via Boost wrote: > On 7/19/2017 10:29 AM, paul via Boost wrote: > > > > On Tue, 2...
AMDG On 07/19/2017 10:58 AM, paul via Boost wrote: > On Wed, 2017-07-19 at 12:39 -0400, Edward Diener via Boost wrote: >> Please loo...
On Wed, 2017-07-19 at 11:23 -0600, Steven Watanabe via Boost wrote: > AMDG > > On 07/19/2017 10:58 AM, paul via Boost wrote: > > ...
>> I'm afraid I don't understand. pre-built library targets >> can have usage requirements just like any other target. > But w...
Den 19-07-2017 kl. 18:58 skrev paul via Boost: > On Wed, 2017-07-19 at 12:39 -0400, Edward Diener via Boost wrote: >> Please look at ...
On 18/07/2017 21:28, Edward Diener via Boost wrote: > In that case why not have said that Boost libraries and tools will be > supportin...
Den 18-07-2017 kl. 23:23 skrev Ion Gaztañaga via Boost: > On 18/07/2017 21:28, Edward Diener via Boost wrote: > >> In that case why n...
On 7/19/2017 5:08 AM, Thorsten Ottosen via Boost wrote: > Den 18-07-2017 kl. 23:23 skrev Ion Gaztañaga via Boost: >> On 18/07/2017 21:28,...
Am 18.07.2017 um 17:14 schrieb Thorsten Ottosen via Boost: > Den 18-07-2017 kl. 16:44 skrev Edward Diener via Boost: >> On 7/18/2017 9:12...
On the mailing list. A few people are also on the #boost Slack channel, but I think we'd be better discussing exactly what the community shou...
On Tue, Jul 18, 2017 at 6:12 AM, Jon Kalb via Boost <boost@...> wrote: > Therefore, we, the Steering Committee, announce...our...intent t...
On 18/07/2017 16:12, Jon Kalb via Boost wrote: > Therefore, we, the Steering Committee, announce to the Boost community our > desire and in...
On Tue, Jul 18, 2017 at 5:00 PM, Vladimir Prus via Boost < boost@...> wrote: > On 18/07/2017 16:12, Jon Kalb via Boost wrote: > >&...
> The CMake issue has been around for years and hasn't been able to progress > primarily because "obviously biased" vocal minori...
On 19/07/2017 16:33, Peter Dimov via Boost wrote: > Organizationally speaking, what needed to be done? First, we choose > which scenario ...
> -----Original Message----- > From: Boost [mailto:boost-bounces@...] On Behalf Of Ion Gaztañaga via Boost > Sent: 19 July 2017 16:...
> There are two ways to do it. The first one is a gradual transition. We > currently have two pieces of critical infrastructure reliant ...
Den 19-07-2017 kl. 14:05 skrev David Sankel via Boost: > On Tue, Jul 18, 2017 at 5:00 PM, Vladimir Prus via Boost < > boost@...> wrote...
I hate getting into these kinds of arguments.. But this email is a bit too far for me to not respond. On Wed, Jul 19, 2017 at 6:05 AM, David S...
Le 19.07.17 à 14:27, Rene Rivera via Boost a écrit : > I hate getting into these kinds of arguments.. But this email is a bit too > far fo...
> -----Original Message----- > From: Boost [mailto:boost-bounces@...] On Behalf Of Raffi Enficiaud via Boost > Sent: 19 July 2017 1...
On 7/19/17 7:47 AM, Paul A. Bristow via Boost wrote: > To progress beyond statements of desire and intent, we need to have quite a lot of do...
On 18.07.2017 17:00, Vladimir Prus via Boost wrote: > On 18/07/2017 16:12, Jon Kalb via Boost wrote: >> Therefore, we, the Steering Commi...
On 19/07/2017 11:43, Stefan Seefeld wrote: > So, in this spirit, I reiterate my counter-proposal: Change the Boost > (build) infrastructur...
On 7/18/17 5:06 PM, Gavin Lambert via Boost wrote: > Doesn't this just then push the burden onto the user of Boost libraries > to have *a...
On 19/07/2017 14:41, Robert Ramey wrote: > One thing that always seems to get lost in this discussion is the > distinction between library ...
On 7/18/17 11:57 PM, Gavin Lambert via Boost wrote: > On 19/07/2017 14:41, Robert Ramey wrote: >> One thing that always seems to get lost...
On 7/18/2017 7:43 PM, Stefan Seefeld via Boost wrote: > On 18.07.2017 17:00, Vladimir Prus via Boost wrote: >> On 18/07/2017 16:12, Jon K...
> On 18.07.2017 17:00, Vladimir Prus via Boost wrote: > > On 18/07/2017 16:12, Jon Kalb via Boost wrote: > >> Therefore, we, t...
On 18.07.2017 19:43, Louis Dionne via Boost wrote: >> On 18.07.2017 17:00, Vladimir Prus via Boost wrote: >>> On 18/07/2017 16:12, ...
> Yes. I have repeatedly pointed out another (much more natural) solution > for the problem of wholesale migrations (modularity !), which ...
Den 18-07-2017 kl. 23:00 skrev Vladimir Prus via Boost: > On 18/07/2017 16:12, Jon Kalb via Boost wrote: >> Therefore, we, the Steering C...
> There is no doubt that all SC members mean only good for Boost and C++ > community, I know many of them as excellent developers who contr...
On 19/07/2017 03:01, Niall Douglas via Boost wrote: >> There is no doubt that all SC members mean only good for Boost and C++ >> com...
Den 19-07-2017 kl. 08:49 skrev Vladimir Prus via Boost: > On 19/07/2017 03:01, Niall Douglas via Boost wrote: > However, if the numbers ...
A modest proposal for Boost evolution – I) Accept proposals for new boost tools into the review queue. Such tools might be just Cmake templates or things like that. Encourage membe...
On Tue, Jul 18, 2017 at 8:12 AM, Jon Kalb via Boost <boost@...> wrote: > > The libraries produced by the Boost community have had a...
On Tue, Jul 19, 2017 at 3:31 AM, Barrett Addair wrote: > Additionally, I think the creation of a dedicated mailing list would be > useful...
On 7/18/17 6:12 AM, Jon Kalb via Boost wrote: > Therefore, we, the Steering Committee, announce to the Boost community our desire and intent to...
I think I can apologize for the whole SC if this message was perceived as coming "out of the blue", as this was clearly not the int...
On Tue, 18 Jul 2017 at 15:00 Louis Dionne via Boost <boost@...> wrote: > > > (1) Users have a hard time integrating Boost int...
On 19/07/2017 08:24, Chris Glover wrote: > I use CMake for all of my personal and open source projects and it's great > for that, but no com...
On Tue, Jul 18, 2017 at 3:24 PM, Chris Glover via Boost < boost@...> wrote: [snip] internal package manager before I can upgrade boos...
On 07/18/2017 04:33 PM, Zach Laine via Boost wrote: > On Tue, Jul 18, 2017 at 3:24 PM, Chris Glover via Boost < > boost@...> wrote: ...
On Tue, Jul 18, 2017 at 11:27 AM, Robert Ramey via Boost <boost@...> wrote: > As it reads - it sounds like a decision has been made to ...
On Tue, Jul 18, 2017 at 4:12 PM, Jon Kalb via Boost <boost@...> wrote: > > Therefore, we, the Steering Committee, announce to the Boos...
On 18 July 2017 at 21:54, Artyom Beilis via Boost <boost@...> wrote: > On Tue, Jul 18, 2017 at 4:12 PM, Jon Kalb via Boost > <boost...
On Tue, 2017-07-18 at 06:12 -0700, Jon Kalb via Boost wrote: > The libraries produced by the Boost community have had a greater impact on > ...
On Tue, Jul 18, 2017 at 3:12 PM, Jon Kalb via Boost <boost@...> wrote: > Therefore, we, the Steering Committee, announce to the Boost com...
On Tue, Jul 18, 2017 at 7:12 AM, Jon Kalb via Boost <boost@...> wrote: > Therefore, we, the Steering Committee, announce to the Boost co...
On Tue, Jul 18, 2017 at 8:15 AM, Rene Rivera <grafikrobot@...> wrote: > As a consequence.. I herby resign from all my duties in the Bo...
On Tue, Jul 18, 2017 at 7:15 AM, Rene Rivera via Boost <boost@...> wrote: > Goodby.. Adios. I am truly sorry to hear that. I have al...